See Also

Amadeus PM PRO Workstation

Amadeus - PMPRO is usually installed on the application or file server in your hotel network.

  1. Make sure your server meets the system requirements.

  2. Your system administrator must share the installation folder to provide access to Amadeus - PMPRO from a workstation.

  3. Browse to the \Brilliant\Setups folder on your server and install the Amadeus - PMPRO Common Runtime files.

  4. Create a shortcut to Amadeus - PMPRO onto the desktop of "all users".

Windows Configuration

The following Windows configuration is recommended on all workstations

 

Field

Description

User Rights

All users must also have full access rights to the temporary files folder as specified in the Systems tab of the Preferences.

Workstation Name

Each work station must have a unique computer name. The name may not be longer then 15 characters.

Date and Time

Amadeus PMPRO saves the current workstation date and time in various transactions and log files. It is therefore required that each workstation has the same date and time settings":

  • Same date, time, and time zone

  • Enable Automatically adjust for daylight saving on the server and each workstation.

  • Enable Automatically synchronize with an internet time server on the server and each workstation. Alternatively, fill in the server name in the Time Server Name field on the Systems tab of the Preferences to keep the time on each workstation synchronized with the time on the server.

Display Settings

The display settings of your computer must be set to a minimum resolution of 1024x786.

Drive mapping

Drive mapping is not required, but in case you would like to create a drive mapping to the Amadeus - PMPRO installation directory on the file server you must make sure to use the same drive letter on each workstation.

Printer

Install the printer drivers for the printer that is connected to your computer. You may also use a network printer, provided that it is set as the default printer.

Microsoft Office

Microsoft Office (from version 2003) is optional to create confirmation letters with Microsoft Word. All workstations must run the same version of Microsoft Office.

IHG Routing

For workstations to be able to connect to IHG Concerto, issue the below commands in command prompt where 'AT&T IP' needs to be replaced with the ip address of the IHG router.

route add -p 10.220.0.0 mask 255.255.0.0 AT&T IP

route add -p 10.239.0.0 mask 255.255.0.0 AT&T IP

route add -p 10.223.0.0 mask 255.255.0.0 AT&T IP

route add -p 10.224.0.0 mask 255.255.0.0 AT&T IP

route add -p 10.210.0.0 mask 255.254.0.0 AT&T IP

route add -p 10.212.0.0 mask 255.254.0.0 AT&T IP

route add -p 165.2.64.0 mask 255.255.255.0 AT&T IP